Cycling Gear

Dimension Mini Bells take up less room on handlebars and fit 40mm or narrower. Check out the video for YouTube sound clips!

Dimension Mini Bells take up less room on handlebars and fit 40mm or narrower. Check out the video for a YouTube sound clip!

Dimension Mini Bells take up less room on handlebars and fit 40mm or narrower. Check out the video for a YouTube sound clip!

The NiteRider Tail Light Strap Mount allows for quick installation and fitment on to standard seat posts. It features a quick release tab that allows you to remove just your tail light, leaving the strap mount installed on the seat post; ideal for when you leave your bike unattended or when it's time for a recharge. System Compatibility - Sentinel - Solas - Sabre - CherryBomb - TL 5.0 SL Not compatible with omega 300 and sentry aero 260 tail lights.

This little bell from Origin-8 is light and LOUD! A flick of your finger and the Ding! Ding! rings clear for all to hear.

-Mounts easily to front racks with threaded M5 mounts -Allows for unobstructed light positioning -22.2mm clamping diameter

Don't let the small size fool you. Mirrycle's Incredibell Triple is little, light and LOUD! Plus, its diminutive dimensions let you mount it just about anywhere on your handlebars. A flick of your finger and the Ding! Ding! rings clear for all to hear. The Triple fits the 3 most common handlebar sizes: 22.2mm, 25.4mm and 31.8mm. - Dome Diameter: 37mm (1.3")

Replacement Part – Universal Handlebar Bracket - Fits all current Serfas headlights with a removable bracket - Fits bars up to 31.8mm horizontal & vertical adjustable - Easily removes from bar in seconds - No tools needed - Works With: TSL-100, TSL-150, TSL-150+, TSL-200, TSL-250, TSL-250+, TSL-500, TSL-500+, TSL-1000, TSL-1500, SL-155, SL-255, USL-155, USL-305, USL-505, TSL-350, TSL-550, TSL-750, TSL-T1000, TSL-LT1000, TSL-1200, TSL-1800, TSL-2500, HL-1.1, & SL-30WP - Works for all Serfas headlights EXCEPT for SL-200 & SL40WP

Put it on your seatpost, put it on your seatstay, put it anywhere—Sunlite's Griplite goes everywhere. This powerful little light boasts two LEDs and runs for a whopping 100 hours! It has steady and two flashing modes, and is housed in a water-resistant body.

Put it on your handlebars, put it on your fork leg, put it anywhere—Sunlite's Griplite goes everywhere! This powerful little light has 2 LEDs and runs for a whopping 100 hours! It has steady and flashing modes and is housed in a water-resistant body.

• 2 bright Nichia LEDs • Uses 2 CR 2032 lithium batteries (included) • 100 hour run time • 3 modes: 2 flashing and 1 steady • Water-resistant silicone body

• 2 bright Red LEDs • Includes 2 (CR 2032) lithium batteries • 100 hour run time • 3 mode (2 flashing modes & steady mode) • Water resistant silicone body

Classic Ring Minimalist design and low profile. Features - Classic ring - Low profile with clean minimalist design - Adjustable rotating thumb spring trigger for ambidextrous use - Quick Assembly: Tool-free - ratchet strap mounts to any size bar 19.2 - 31.8 mm - Alloy dome with molded thermoplastic mounting - Weight: 0.05 lb / 20g

• Front reflector (white) • Rear reflector (red)

Lezyne's Composite Bar Mount is a hard mount made of a reinforced Composite Matrix cradle for a strong and secure attachment of the Mega Drive, Deca Drive, and XL LED lights to the handlebar. It is designed for 25.4 mm or 31.8 mm bars, with the cradle designed to pivot 15 degrees laterally to allow adjustment of the LED light beam angle and directing it where it is most needed. A large thumb screw secures the CM mount to the bar without need of tools, and can be tightened by hand or a 1mm hex key. Molded rubber shims add grip and fine-tune fitting to undersized bars. Composite Bar Mounts are sold in a kit with the Mega Drive, Deca Drive, or XL LED lights.

Sunlite's HL-K100 Headlight is a great light at a great price. It sports a super-bright Krypton bulb housed in a tough, water-resistant body so it's perfect for commuting year round. A no-tools-required quick-release handlebar mount is included, too.

•Handlebar mount •Fits most bikes •Alloy ringer style bell •53mm

• Front reflector (white) • Rear reflector (red) • Two wheel reflectors (white) w/spoke attachments

Let everyone know your coming with Sunlite's I Love My Bike Bell. It makes the classic "ring-ring" sound that everyone loves. It fits most bars and can be used right or left handed.

Be seen with CatEye's Omni 3 Taillight, which uses Omni Directional Technology for 360 degrees of visibility. Three super-bright LEDs light up in three different modes so you can customize the pattern and get run times up to 200 hours. Plus, CatEye's tool-free mount makes installation a breeze.

Mount your Cygolite bicycle headlight to a variety of GoPro compatible interfaces and third-party mounting options that are compatible with the GoPro interface. - Compatible with Ranger, Expilion, Metro, and Streak series - Includes adapter piece only

Clear, luxurious bellissimo double ring A good, clear bike bell can make the difference between a safe ride and a dangerous one. Features - Clear, luxurious bellissimo double ring - Luxe aesthetic and design - Twist top action - Quick Assembly: Easy screwdriver installation on 22.2 mm bar - Construction: Molded thermoplastic with shell inner bell - Weight: 0.08 lb / 38g

Rider Safety Safety for every rider is of the utmost importance. Features - Ball & socket for optimum viewing angle - Compatibility: Fits drop and flat bars - Quick Assembly: Bar end mount - Construction: Molded thermoplastic with ultra-clear 800R glass lens - Weight: 0.18 lb / 82g

Medium sized bells with exciting and classic designs to fit a range from 46mm to 60mm wide. Check out the video for a YouTube sound clip!

Dimension Mini Bells take up less room on handlebars and fit 40mm or narrower. Check out the video for a YouTube sound clip!

The best thing to happen to handlebars since grips. - Easy to push lever creates friendly ringing sound - Fits standard bicycle handlebar - Includes attachment hardware

- Tool-free installation and adjustment - Compatible with 19 – 22mm inner diameter bars

Fits 22-25.4mm Handlebars

Fits 22-25.4mm Handlebars

Fits 22-25.4mm Handlebars

- Fits 22-25.4mm Handlebars

- Fits 22-25.4mm Handlebars

Mount the Nip light to an e-Bike that has the specialty Pro Max stem for accessories.

This wide, adjustable leg band with adjustable hook and loop closure secures loose pant legs and prevents them from catching in the chain. - Reflective striping for additional visibility - Reliable hook and loop closure system works both wet and dry - Flexible material stretches for additional comfort - 2 3/8-inch width

The NiteRider Adjustable Angle Tail Light Strap Mount was specifically designed for our flagship tail light, the Sentinel. It allows you to fine-tune the mounting angle of the light to display the projected Laser Lanes even and parallel on the ground. It's an easy on and off non-slip tail light mount that also features a grooved contact pad that makes this the 'go to' mount for riders using aero seat posts. System Compatibility - Sentinel - Solas - Sabre - CherryBomb

The NiteRider Lumina Handlebar Strap Mount offers a wide variety of handlebar size fitments and remains rock solid while riding through rough terrain. It’s easy to install and, like all NiteRider mounts, features a quick release tab for when it’s time to recharge or leave your bike unattended. System Compatibility: - Lumina Series - Mako Series - MiNewt Cordless Series

If you're looking to mount your NiteRider PRO series lights to a GO Action Camera style mounting point, this is the accessory you've been looking for. The mounting point screws into the GO Action Camera style connection for a solid and secure fitment. SYSTEM COMPATIBILITY - PRO Series Not compatible with Lumina Pro lighting systems

The NiteRider Tail Light Rack Mount gives you the option to mount your tail light directly onto your rack-ready/-equipped bike via this rack mount accessory. System Compatibility - Sentinel - Solas - Sabre - CherryBomb - TL 5.0 SL

Make sure you have excellent rear visibility at night with the Blinky 3. This sweet taillight aims 3 bright LEDs directionally to provide visibility from up to a mile away. Its soft-touch power switch accesses flashing or steady modes for up to 100 hours of run time on the 2 AAA batteries (included). And, it includes seatpost and seatstay mounts.

The Courtesy Flexi bell gives you the flexibility to mount it on handlebars of any diameter and other locations such as your stem. Its diminutive size and clean tone make it a great way to announce to other path users that you are passing on the left. - Stretch strap mounts quickly and securely attaches to bars or stem - Diminutive size won’t clutter up your handlebars - Lightweight brass bell has a clean sound - Fits bar diameters 16mm – 42mm - 360-degree dinger rotation for perfect positioning - High fatigue spring

Features - Construction: Molded thermoplastic with ultra-clear 800R glass lens and backside reflector for added safety - Adjustability: Flexible neck delivers optimum viewing angle - Compatibility: Fits any bar with up to 1" (25.4mm) diameter - Quick Assembly: Tool-free mount with included thumb screw

Long battery life combined with simple, tool-free mounting makes MSW Mouse lights a great economical pick to be seen on the road. - Simple, tool-free mounting on bars from 22.2 - 35mm - 3 lighting modes: high, low, flash - CR2032 battery included

Mirrycle's Incredibell Adjustabell 2 uses a fully adjustable handlebar clamp that fits any size bars. Its perfect size and pivoting ringer let you mount it just about anywhere on your handlebars, and allows you to ring it with your thumb or finger. The Adjustabell 2 can even be mounted to a ski pole or walking stick. One flick and it rings loud and clear for all to hear. - Weight: 26g (.9oz) - Dome Diameter: 34mm (1.34") - Fits handlebars with 15mm – 39mm (.59"- 1.54") outside diameters

Replacement pads for all Specialized Chamonix helmets Model Year 2014 to present.

Replacement visor bolts for Specialized Dissident helmets.

Ponytail-ready HairPort SL II fit system with six height positions and micro-adjustable dial for optimized fit. - Helmet not included, sold separately

Replacement fit system assembly for Echelon, Echelon II, Propero II, Tactic, Tactic II with mushroom-plug snap attachment (verses the new 5-position adjustable attachment).

Easy-adjust Headset SL II fit system with six height positions and micro-adjustable dial. - Helmet not included, sold separately

Replacement Padset for Mode

Replacement pads for all Tactic 3 helmets.

Replacement Padset for Tactic 4

Replacement visor for all Specialized Tactic II helmets.

Replacement visor for all Tactic III helmets.

- Replacement fit system with Hairport. - Size Specific

- 32 lumen single LED safety light - 2 modes - steady and flashing - 2 CR2032 batteries included - Water resistant design

- 8 lumen, single LED safety light - 2 modes - solid and flashing - Up to 110 hour run time with 2 CR2032 batteries (included) - Multi-fit rubber strap attachment

Replacement visor for all Ambush helmets.

Sunlite's 330 Taillight helps you be seen. It sports a 100 hour run time with a 1/2 watt 3 LED system. The housing is water resistant and it has steady and flashing modes.

Sunlite's CE-1 Bar End Mirror offers a nice, wide and clear view of what's behind so you can ride more safely. It quickly and easily attaches to virtually any handlebar configuration. And, it's light and fully adjustable.

•Classic condor design •Clamp fits most handlebars •Steel construction