Cycling Gear

Dimension Mini Bells take up less room on handlebars and fit 40mm or narrower. Check out the video for YouTube sound clips!

Dimension Mini Bells take up less room on handlebars and fit 40mm or narrower. Check out the video for a YouTube sound clip!

Dimension Mini Bells take up less room on handlebars and fit 40mm or narrower. Check out the video for a YouTube sound clip!

The NiteRider Tail Light Strap Mount allows for quick installation and fitment on to standard seat posts. It features a quick release tab that allows you to remove just your tail light, leaving the strap mount installed on the seat post; ideal for when you leave your bike unattended or when it's time for a recharge. System Compatibility - Sentinel - Solas - Sabre - CherryBomb - TL 5.0 SL Not compatible with omega 300 and sentry aero 260 tail lights.

This little bell from Origin-8 is light and LOUD! A flick of your finger and the Ding! Ding! rings clear for all to hear.

-Mounts easily to front racks with threaded M5 mounts -Allows for unobstructed light positioning -22.2mm clamping diameter

Don't let the small size fool you. Mirrycle's Incredibell Triple is little, light and LOUD! Plus, its diminutive dimensions let you mount it just about anywhere on your handlebars. A flick of your finger and the Ding! Ding! rings clear for all to hear. The Triple fits the 3 most common handlebar sizes: 22.2mm, 25.4mm and 31.8mm. - Dome Diameter: 37mm (1.3")

Replacement Part – Universal Handlebar Bracket - Fits all current Serfas headlights with a removable bracket - Fits bars up to 31.8mm horizontal & vertical adjustable - Easily removes from bar in seconds - No tools needed - Works With: TSL-100, TSL-150, TSL-150+, TSL-200, TSL-250, TSL-250+, TSL-500, TSL-500+, TSL-1000, TSL-1500, SL-155, SL-255, USL-155, USL-305, USL-505, TSL-350, TSL-550, TSL-750, TSL-T1000, TSL-LT1000, TSL-1200, TSL-1800, TSL-2500, HL-1.1, & SL-30WP - Works for all Serfas headlights EXCEPT for SL-200 & SL40WP

Put it on your seatpost, put it on your seatstay, put it anywhere—Sunlite's Griplite goes everywhere. This powerful little light boasts two LEDs and runs for a whopping 100 hours! It has steady and two flashing modes, and is housed in a water-resistant body.

Put it on your handlebars, put it on your fork leg, put it anywhere—Sunlite's Griplite goes everywhere! This powerful little light has 2 LEDs and runs for a whopping 100 hours! It has steady and flashing modes and is housed in a water-resistant body.

• 2 bright Nichia LEDs • Uses 2 CR 2032 lithium batteries (included) • 100 hour run time • 3 modes: 2 flashing and 1 steady • Water-resistant silicone body

• 2 bright Red LEDs • Includes 2 (CR 2032) lithium batteries • 100 hour run time • 3 mode (2 flashing modes & steady mode) • Water resistant silicone body

Classic Ring Minimalist design and low profile. Features - Classic ring - Low profile with clean minimalist design - Adjustable rotating thumb spring trigger for ambidextrous use - Quick Assembly: Tool-free - ratchet strap mounts to any size bar 19.2 - 31.8 mm - Alloy dome with molded thermoplastic mounting - Weight: 0.05 lb / 20g

• Front reflector (white) • Rear reflector (red)

Lezyne's Composite Bar Mount is a hard mount made of a reinforced Composite Matrix cradle for a strong and secure attachment of the Mega Drive, Deca Drive, and XL LED lights to the handlebar. It is designed for 25.4 mm or 31.8 mm bars, with the cradle designed to pivot 15 degrees laterally to allow adjustment of the LED light beam angle and directing it where it is most needed. A large thumb screw secures the CM mount to the bar without need of tools, and can be tightened by hand or a 1mm hex key. Molded rubber shims add grip and fine-tune fitting to undersized bars. Composite Bar Mounts are sold in a kit with the Mega Drive, Deca Drive, or XL LED lights.

Sunlite's HL-K100 Headlight is a great light at a great price. It sports a super-bright Krypton bulb housed in a tough, water-resistant body so it's perfect for commuting year round. A no-tools-required quick-release handlebar mount is included, too.

•Handlebar mount •Fits most bikes •Alloy ringer style bell •53mm

• Front reflector (white) • Rear reflector (red) • Two wheel reflectors (white) w/spoke attachments

Let everyone know your coming with Sunlite's I Love My Bike Bell. It makes the classic "ring-ring" sound that everyone loves. It fits most bars and can be used right or left handed.

Be seen with CatEye's Omni 3 Taillight, which uses Omni Directional Technology for 360 degrees of visibility. Three super-bright LEDs light up in three different modes so you can customize the pattern and get run times up to 200 hours. Plus, CatEye's tool-free mount makes installation a breeze.

Mount your Cygolite bicycle headlight to a variety of GoPro compatible interfaces and third-party mounting options that are compatible with the GoPro interface. - Compatible with Ranger, Expilion, Metro, and Streak series - Includes adapter piece only

Clear, luxurious bellissimo double ring A good, clear bike bell can make the difference between a safe ride and a dangerous one. Features - Clear, luxurious bellissimo double ring - Luxe aesthetic and design - Twist top action - Quick Assembly: Easy screwdriver installation on 22.2 mm bar - Construction: Molded thermoplastic with shell inner bell - Weight: 0.08 lb / 38g

Rider Safety Safety for every rider is of the utmost importance. Features - Ball & socket for optimum viewing angle - Compatibility: Fits drop and flat bars - Quick Assembly: Bar end mount - Construction: Molded thermoplastic with ultra-clear 800R glass lens - Weight: 0.18 lb / 82g

Medium sized bells with exciting and classic designs to fit a range from 46mm to 60mm wide. Check out the video for a YouTube sound clip!

Dimension Mini Bells take up less room on handlebars and fit 40mm or narrower. Check out the video for a YouTube sound clip!

The best thing to happen to handlebars since grips. - Easy to push lever creates friendly ringing sound - Fits standard bicycle handlebar - Includes attachment hardware

- Tool-free installation and adjustment - Compatible with 19 – 22mm inner diameter bars

Fits 22-25.4mm Handlebars

Fits 22-25.4mm Handlebars

Fits 22-25.4mm Handlebars