Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Wheels

All-City New Sheriff SL Hubs
$85.00
New Sheriff hubs are the ultimate in track racing hubs. They minimize weight with larger cutouts in the flanges, lightened axles, shorter bolts, and slimmer end caps than previous versions. The result is a hubset that weighs a mere 432g, 198g for the front, and 234g for the rear. This makes it one of the lightest track hubsets in the world, a figure even more impressive when you consider that All-City didn't eliminate the usefulness of a fixed / fixed or fixed / free option as most racing hubs do. They feature the finest Japanese manufactured 6902 bearings which roll incredibly fast and smooth while retaining excellent seals for all weather, all-day everyday durability. Front hub specs: - Weight: 198g - Torque Spec: 33nm (25ft lbs.) - Non-Drive Side Center to Flange: 34mm - Drive Side Center to Flange: 34mm - Non-Drive Side Flange Diameter: 62mm - Drive Side Flange Diameter: 62mm Rear hub specs: - Weight: 234g - Torque Spec: 33nm (25ft.lbs.) - Non-Drive Side Center to Flange: 29mm - Drive Side Center to Flange: 29mm - Non-Drive Side Flange Diameter: 62mm - Drive Side Flange Diameter: 62mm
Whisky Parts Co. No. 9 Carbon 50d 700c Rim
$450.00
Whisky's No.9 50d rims are designed to a be a lightweight, aero, stable starting point to build exquisite wheels. They offer an aero advantage over the 30d rims, while offering a stiffer, more robust platform. Fit for long days in the saddle, cutting through the wind and hammering finish line sprints, they’re a perfect all-rounder. These disc brake-specific rims offer clean design and aesthetics. Featuring a wide inner width, they pair well with a variety of tires across the full range of drop bar pursuits. As with all rims Whisky makes, these come with tubeless valves and required tape in the box. - Designed to be used with spoke nipple washers - Rider weight limit: 300lbs
Zipp Tangente Tube Wrench
$7.00
Zipp Speed Weaponry Valve Extender Wrench Set - Two 4 mm and 5 mm combination wrenches - Replacement wrenches required to properly install Zipp integrated valve extenders - Use with Zipp Tangente tubes with aluminum Presta valve and aluminum valve extender
Stan's NoTubes Presta Removeable Valve Core
$2.00
Stan's No Tubes' Presta Removable Valve Core is a replacement valve core for Stan's No Tubes Presta valve stems and Presta valve equipped rim strips.
Roval SLX 24 Disc Wheels
$800.00
The Roval SLX 24 Disc is a no nonsense wheelset. At only around 1515 grams, it's designed for light overall weight, but this doesn't mean that it sacrifices anything to strength or durability. Instead, its 20mm-wide alloy rims work to bolster the aforementioned characteristics, while also providing the optimal tire profile in order to enhance both confidence and feel on the road. Meanwhile, the rims have been built to Roval aero hubs that feature fast-engaging DT 350 star-ratchet internals at the rear. Add it all up, and you get a wheelset that checks all of the boxes for daily training and CX racing—lightweight, stiff, and incredibly reliable.
Whisky Parts Co. Tubeless Conversion Rim Tape Kits
$9.00 - $13.00
Whisky Parts Co. Tubeless Rim Tape.
Whisky Parts Co. Tubeless Rim Tape
$8.00 - $40.00
Whisky’s tubeless rim tape is designed to make setup as easy as possible. Elasticity allows for smooth, even adherence while translucency lets you see where the tape contacts the rim. Different widths available to fit almost any rim.
Lezyne CNC TLR Valve Pair
$19.99
- CNC-machined tubeless valves with aluminum stem nut and valve core wrench cap - Fit for most other tubeless rims and wheel
Problem Solvers Booster
$19.99
Booster thru-axle hub spacer kits are designed to give your non-Boost front and rear thru-axle hubs the boost they need to fit any Boost-compatible frame or fork.
Roval CLX 32 Tubular Wheel
$659.95 - $999.99 $1,100.00 - $1,400.00 Up to 40% Off
The Roval CLX 32 Tubular wheels are some of the lightest carbon wheels ever made, but this doesn't come at the expense of fundamental performance. Instead, painstaking engineering and lab testing helped them achieve a 490-gram front and 665-gram rear wheel that's tough enough for cyclocross racing, yet light enough for the demands of a GC climber. The low inertia and ample stiffness help the wheel accelerate and change direction on a dime. We didn't skimp on aerodynamic benefits either, despite this wheel's low rim profile. The CLX 32 was engineered in CFD around a 26mm-wide tire shape, and honed in Roval's very own Win Tunnel, in order to be as aerodynamic as some rims almost twice its depth. Meanwhile, Roval aero hubs and CeramicSpeed bearings complete the fast-engaging ensemble. Truly, the CLX 32 ushers in a new era of lightweight performance road wheels.
Roval CLX 40 Tubular Wheels
$299.95 $1,000.00 70% Off
Slice through the wind on Roval's Rapide CLX 40 Wheelset. They feature 40mm-tall aero carbon rims, and DT Swiss Revolution straight-pull spokes laced to sealed ceramic cartridge bearings Roval hubs. The rear hub is adorned with DT Swiss's renowned 240 star ratchet internals. The wide, carbon rim provides a round tire profile and greater lateral stiffness for precise handling. This feathery, 1240-gram wheelset spins up with ease so you can bolt out of corners and breeze up the climbs. With your favorite tubular tires, these wheels roll as smooth as silk.
WTB HTZ i30 27.5-inch TCS 2.0
$99.95
E-bikes add to the riding experience by simply providing more for less. More distance, more laps, more climbs and more descents. With all those "mores" also comes more weight continually bashing on the components of an e-bike. In order to overcome the increased forces induced by the technological progression of modern e-bikes, we designed our HTZ rims with more material in every area of the rim prole. Every wall of the rim is 25-30% thicker in comparison to those on our standard rims, which we then paired with our proven I-Beam center support to ensure no beating was too great for these rims. All HTZ rims are TCS 2.0 tubeless, feature asymmetrical spoke drilling, and are available in widths ranging from i23 to i35 in order to provide options for e-bikes ranging from e-assist gravel bikes to dual-crown downhill bikes that no longer need a truck to be shuttled. FEATURES: - Capable of withstanding the forces of a modern e-bike. - 4D angled spoke drilling eliminates binding and lateral loading and disperses tension more evenly over a greater area. - Symmetric outer profile provides equal dissipation of impact forces on both sides of the rim while asymmetric spoke hole drilling allows for more even spoke tension and increased wheel strength. - Disc-brake only. - TCS 2.0 Tubeless ready and comes with a preinstalled Solid Strip, which lies beneath the tubeless tape and prevents sagging at the spoke holes, creating a smooth interface between the rim and tire bead. This prevents air from escaping around the bead and therefore requires less air volume and pressure to mount a tire. Solid Strip also protects the airtight tubeless system from being punctured in the case of a broken spoke. TCS 2.0 creates a more robust, easily installed, and dependable tubeless system. USAGE: E-bike
DT Swiss H 1700 Spline 30 27.5-inch Front
$378.90
It's a fact: On an E-MTB you run into trail sections much faster than you have ever before considered possible. The H 1700 SPLINE 30 has the power to get you out of such situations as a winner and not face down in the dirt. Steering precision is covered by the strong spokes and the trademark DT Swiss wheel build with high and even spoke tension. The rim can take tires suited for fast riding on rugged terrain and supports them perfectly, even at low pressures. Reliable Ratchet System hubs finally make sure that you can come back and attack those gnarly sections of trail time and time again.
DT Swiss XMC 1200 SPLINE 30 29-inch Rear
$1,606.90
The XMC 1200 SPLINE 30 is the ultimate all-mountain wheel. A carbon layup specifically tuned for all-mountain use makes the rim tough, yet super-light. And, with a 30mm internal width, it's made for wide rubber. The hubs feature the latest incarnation of our Ratchet System for smooth, rapid engagement and reliability. Extremely refined machining and fully lasered graphics make them the lightest hubs DT Swiss has ever made. Together with bladed, top-end spokes and perfect DT Swiss build quality, this wheelset is made to ride trails with speed and confidence. - SRAM XD MTB cassette-compatible
SRAM 900 Front Hub
$83.00
Whether the goal is a finish line, epic adventure or simply getting back home again, SRAM's 900 hubs are ready for the challenge. On the inside, their smooth and durable DOUBLE TIME drive mechanism ensures rapid engagement for quick and confident pedal responsiveness. SPEEDBALL bearings provide smooth, long-lasting rotation performance. Multiple spoke-count and cassette-capability options, as well as interchangeable end caps, make the 900 hubs a perfect choice for any disc-equipped road, gravel, cyclocross, cross country, trail, or enduro bike. - Fully convertible with tool-free end caps - 24, 28 or 32 spoke holes
WTB TCS AL 34mm Presta Valve
$24.95
WTB's TCS AL valves are aluminum to shed grams, and come in catchy anodized red, black, or blue. A stepped lock nut adds compatibility among various rim drillings, a smooth pump interface makes adding air easy, and a removable core makes setting beads and injecting sealant a cinch. - Presta - 34mm
Sunlite 5mm Hex Skewers
$20.29
• 5mm skewer set (F+R hubs) • Standard 5mm Hex release • Black or Silver anodized finish • Chromoly axles
Shimano Dura-Ace Track Hi-Flange Rear Hub
$191.99 - $196.99
Shimano's Track Dura-Ace Hi-Flange Hubs build up into stiff, fast spinning wheels that want to sprint right out off the line. Stainless steel bearings and Borozon treated bearing races minimize drag for maximum efficiency and speed. You get your choice of single or double-sided cog threading.
Stan's NoTubes 3.30/3.30Ti Rear Hub End Caps for XD Driver
$17.50
Replacement end caps for Stan's NoTubes rear hubs with XD Driver.
Zipp 30 Course Disc Brake Rear Wheel (Tubular)
$555.00
Upgrade your road bike with Zipp’s 30 Course Disc wheels. Featuring stiff, light 26mm-deep Zipp aluminum rims, Zipp's precision 77D/177D disc hubs and Sapim's outstanding CX-Ray spokes, these hoops maximize your power transfer for superior acceleration, climbing and handling. They also boast a 25mm-wide tire bed for running wider tires to improve the ride even more.
Campagnolo Hub Rebuild/Upgrade Kit
$87.90 - $167.93
- USB and Cult ceramic renewing kits can be used to upgrade Campagnolo wheels that come stock with stainless steel bearings - Kit includes (2) each of dust seals, hub cones, hub cups, and ceramic or steel ball bearings
Zipp 30 Course Rim-brake Clincher
$555.00
Performance, durability, and versatility. Zipp checks all the boxes with its 30 Course Rim-brake Clincher wheelset. A wide 21mm internal rim profile delivers speed, stability and comfort over a variety of surfaces, and Zipp's 71/177 hubset provides smooth and efficient power transfer. Sapim CX-Ray spokes and redesigned ergonomic skewers round out this excellent all-around package. Each wheel includes rim tape, a tubeless valve, and a 1.85mm spacer for use with 10-speed cassettes.
Whisky Parts Co. 70w Rim Decal Kit
$25.00
- Colored rim decal kits to personalize your ride - Decals to fit two (2) 70w 26-inch rims
Sun Ringle Envy Rim
$50.00 - $65.00
Product specs: - 36 hole count - Front and rear specific - 28.5mm wide - Welded - 20", 24" - 395g front rim 392g rear rim - Also available in 24", black only
Wheels Manufacturing Inc. Axle-13
$25.00
Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts. - Fits many Taiwanese hubs - Type: Solid Axle - Threads: 9.5mm x 26tpi - Diameter: 9.5mm - Length: 174mm - 1 axle per bag
Wheels Manufacturing Inc. Axle-19
$25.00
Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts. - Fits many Taiwanese hubs - Type: Solid Axle - Threads: 9.5mm x 26tpi - Diameter: 9.5mm - Length: 155mm - 1 axle per bag
Wheels Manufacturing Inc. Axle-08
$35.00
Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts. - Fits Campagnolo / Italian rear hubs with 130mm spacing - Type: Hollow Axle - Threads: 10mm x 26tpi - Diameter: 10mm - Length: 141mm - 1 axle per bag
Origin8 Hub Cassette Bodies
$51.59
Replacement Cassette body for Origin8 hubs
WeThePeople Supreme Hub Guards
$31.99 - $36.99
Simply replace the cones on your Supreme front and cassette hubs for a perfect fit without having to spread your dropouts. Available in front, rear, and drive side options. These guards now feature a heat-treated chromo insert for longer life.
WeThePeople Supreme Rear Bearing Set
$21.99
Did you trash the bearings on your WTP Supreme rear hub? It's okay, that just means you're going big enough to make it count. Fear not, we've got you covered with this bearing set from WeThePeople.
Page 1 of 18 Next page