Wolf Tooth's SDM® chainrings replace your existing spider and chainring with one clean looking, light weight, and stiff piece of machined billet. These come in 3 different offsets: standard GXP, Boost and BB30.
- These direct mount chainrings will replace your existing chainring and spider, which is attached via 3 bolts on the back side of the spider near the spindle. You will use these same 3 bolts to attach the Wolf Tooth SDM® chainring.
- There are 3 offsets:
Standard: 47mm chainline, 6mm offset for cyclocross and road cranks
Standard: 49mm chainline, 6mm offset for GXP and long spindle BB30
Boost: 52mm chainline, 3mm offset
BB30: 49mm chainline, 0mm offset for BB30 short spindle cranks
- Fat Bikes: If you are planning to use this on an X9 or XX1 fat bike crankset with a 190/197 rear hub spacing use the 0 offset ring. If your fat bike has a 170/177 rear hub spacing, use the Standard 6mm offset
|black / 26t||812719020688||ASM5-SDM26|
|black / 30t||812719020701||ASM5-SDM30|
|black / 32t||812719020718||ASM5-SDM32|
|black / 34t||812719020725||ASM5-SDM34|
|black / 36t||812719020732||ASM5-SDM36|