Pumps/Inflation

Easy to use and compatible with Presta and Schrader valves, the Twin graph is an intuitive gauge that allows an efficient measure of your tire's pressure. - Fits Presta/Schrader - Accurate up to 160psi - Shows PSI and bar - Weighs only 37g

You'll ride with peace of mind when you pack a can of Vittoria's Pit Stop Tire Sealant. It contains pure latex foam sealant and compressed air to quickly inflate and repair your tire so you can get on with your ride. Available in three sizes for varying tire volumes: - Road Racing: inflates 21-28-inch tubulars up to 94 psi and 700c clinchers up to 87 psi so you can ride, instead of walk to the closest pump and top off the tire to full pressure. - 75mL: Repairs and inflates low-volume MTB tires in less than a minute. - 100mL: Repairs and inflates meaty 27.5-inch tires and cross country 29-inch tires in less than a minute.

Pssstttt. Tired of hearing that when you disconnect your shock pump? Well, hear it no more thanks to Topeak's Pressure-Rite. It's a must have for suspension fanatics as its ingenious design prevents air loss when adjusting shock and fork pressure. It's also available in a Presta version, perfect for disc wheels.

A Schrader valve adapter allows using the JoeBlow Ace floor pump for quickly pumping forks and rear shocks. Built-in air release knob allows fine tuning air pressure.

25g CO2 Canister's from Specialized.

Thanks to its smaller-diameter barrel, with Specialized's Air Tool HP Floor Pump it's easier than ever to inflate high-pressure tires. It also features Specialized's SwitchHitter head that works with Presta and Schrader valves, quality steel construction for excellent durability, and a three-sided base for superb stability. Plus, you'll love the comfortable, wide handle, easy-to-read oversize gauge and the nice, long hose.

Specialized's Air Tool Sport Floor Pump boasts all-steel construction, durable internals, a long hose, a sturdy handle and a three-sided base for easy pumping and excellent stability. You also get Specialized's SwitchHitter head that automatically adapts to fit Presta and Schrader valves, and an easy-to-read, 2-inch gauge to make dialing in the right pressure a breeze.

Get the convenience of CO2 inflation in a super-small pump that can be carried anywhere with Specialized's Cpr02 Pump. This little inflator boasts speedy, controlled inflation with the power of compressed CO2 and uses threaded cartridges

The easiest way to use CO2. - Gauge confirms proper inflation, making it easy to adjust pressure mid-ride. - Thumb trigger gives precise control. - Accommodates threaded 16g and 25g cartridges. - One 16g CO2 cartridge included.

A simple, compact system to carry everything you need to fix a flat without weighing you down. - Patent pending design allows the spare tube to be rolled up while protecting valve stem from rubbing a hole through the rubber - CO2 valve head and 2-sided tire lever snap into place for compact and secure storage - Holds a single threaded 16g CO2 cartridge - Fits up to 80mm long tube valve stems

These compact, threaded 16-gram cartridges work with compatible CO2 inflators and easily packs into your seat bag.

Problem Solvers 90 degree Presta valve inflator is used to inflate disc wheels, thanks to its narrow, low-profile head. • Presta valve • 90 degree inflator works with most pump heads

- Super compact and minimalistic design - Easy to use with the controllable internal spring valve system - Reliable system for quick and easy inflation - Includes one 16g threaded Co2 cartridge - Presta and Schrader compatible

The Prestaflator ECO is designed with a medium flow trigger valve providing a perfect balance for inflation and seating tubeless tires. The dial pressure gauge lets you follow your progress visually. Designed for Bicycle Mountain & Road tires with a wide range of pressure requirements. Auto-Select Head Presta / Schrader auto-select head engages with a simple flip of the lever. Quick lever release minimizes air loss at disconnect. Quality Prestaflator is engineered specifically for the needs of bicycles and bicyclists. Only top quality materials are used for it’s components. We start with a cast Alloy body and give it a Nickel plated finish. The hose is made of reinforced PVC. It’s more flexible than rubber hoses and is rated for 300 PSI of continuous use. Smooth alloy clamps on the hose are more comfortable for use. The pressure gauge has a durable steel case covered with a rubber shock housing and offers accuracy with +/- 2%. The dial has a bicycle-specific pressure range of 12 Bar/174 PSI. It’s high enough to inflate any daily-use tire, but not excessive so the gauge is easy to read. Prestaflator – The Original Beware of fakes and cheap imitations sold by one-product sellers. These are not real brands that can stand behind your product. Prestacycle is the originator of the Prestaflator. We are a full-line Bicycle tools company providing the Cycling industry globally with world-class tool designs. Our R&D has created a proven design that we have consistently improved-upon through years of experience. Prestaflator is different… a high quality, serviceable tool… designed, built and warranted for use on Bicycles. Specifications: - 2" / Steel body dial pressure gauge. - 150 PSI (in 2 PSI increments). - 10.5 Bar (in 0.2 Bar increments). - Copper coil mechanism provides good accuracy. - Polymer Presta / Schrader auto-select head. - Engages any valve with a simple flip of the lever. - Presta AND Schrader - Quick lever release minimizes loss at disconnect. - Replaceable I/M compressor quick-release attachment. - Rubber pressure gauge housing for shock protection. - Cast alloy pistol grip handle with Nickel-plated finish. - Thumb-control pressure release button. - High-pressure hose for easy access on any wheel. Disclaimers Air compressor and air hose with quick release connector required for use – not included. Maximum air pressure is limited by your compressor’s capabilities.

CO2 replacement cartridges Planet Bike's line of CO2 replacement cartridges make tire repairs quick and easy. - Our CO2 cartridges work in Planet Bike inflators as well as most competitors' inflators - Planet Bike cartridges are tested to the highest standards for durability, safety and reliability. They contain pure CO2 with no oils or contaminants. - Note - unable to ship CO2 to Canada - 100% recyclable steel cartridges - All threaded cartridges are compatible with Air Kiss, Red Zeppelin, Red Zeppelin 2 & Air Smith CO2. - All 16g cartridges are compatible with the Airship 2.0.

You'll have a whole lotta love for Planet Bike's Red Zeppelin CO2 Inflator Head on long rides. It fits Presta and Schrader valves and weighs next to nothing. Its small size means the Red Zeppelin fits easily in bags, pockets, and packs. And, it's compatible with threaded cartridges (sold separately). Now you'll never be stuck like a "Fool in the Rain."

There’s no easier or more effective way to patch a cut tire on the road or trail than carrying and using Park Emergency Tire Boots (3 per package). These thin, extra-tough patches peel and stick to the insides of tires to repair cuts and contain the tube until you can replace the tire.

Angled Presta valve adapter - Designed for disc wheel use

Lezyne's Caddy Sack CO2 is a complete CO2 inflator and tire repair kit in a simple, weather resistant, reusable pouch. This kit includes a Caddy Sack, Twin Speed Drive, two threaded 16g CO2 cartridges, Power Levers, and a Smart Kit, all the essentials needed to fill your pack for the unexpected tire repair.

Lezyne's easy-to-use Alloy Drive CO2 is super compact and portable. Its simple twist operation lets you control exactly how much CO2 you're putting into your tires. Plus, its aluminum construction is lightweight, durable and easy on the eyes. What's more, the Alloy Drive is Presta/Schrader compatible, comes with an anti-freeze sleeve, and works with 16g threaded cartridges. - CNC machined aluminum dispenser with brass internals - CNC control knob twists for easy and controlled inflation - Twin Slip Chuck head presses on to Presta and Schrader valves - Neoprene sleeve insulates hand from cold during discharge - Compatible with threaded CO2 cartridges - Comes with one 16g cartridge

Lezyne's easy-to-use Alloy Drive CO2 is super compact and portable. Its simple twist operation lets you control exactly how much CO2 you're putting into your tires. Plus, its aluminum construction is lightweight, durable, and easy on the eyes. What's more, the Alloy Drive is Presta/Schrader compatible, comes with an anti-freeze sleeve, and works with 16g threaded cartridges. - CNC machined aluminum dispenser with brass internals - CNC control knob twists for easy and controlled inflation - Twin Slip Chuck head presses on to Presta and Schrader valves - Neoprene sleeve insulates hand from cold during discharge - Compatible with threaded CO2 cartridges - Comes with one 25g cartridge

High volume for big tires, high pressure for skinnies. Simple. The Airstick 2-stage is a durable aluminum pump with enough puff for mountain bike tires and enough pressure for road tubes too, thanks to the two-stage high pressure/high volume switch. - Presta head only - High Volume or High Pressure - Includes frame mount - 85 gr/ 3oz - 160 PSI, 11 Bar maximum

Combine the best elements of all of Blackburn's mini-pumps and what do you get? The Core CO2'Fer Pump. The Core CO2'Fer is an excellent stand-alone mini-pump that adds the versatility of an integrated CO2 inflator and the peace of mind of a Presta valve tool, ensuring nothing goes wrong when all you need is an inflated tire. A remote inflation hose takes unwanted stress off the tire valve. - Removable CO2 inflator - 120 PSI - Thread-on Presta/Schrader - Retractable hose - Removable Presta valve core tool - Includes 16g cartridge, frame mount, CO2 strap

The pull-out hose puts less stress on the valve. It's all very well hauling a giant pump around, but all that leverage can snap a delicate valve stem right off. This is a slimmer version of Blackburn's Core Pump that features a thread-on Presta-specific head with a short pull-out hose to give more options on where you pump from and fewer chances of your rippling muscles pulling the thing clean off. We weren't using that space in the barrel anyway, so the hose doesn't even affect the pump's efficiency. - Machined Presta valve core tool in the pump's base - Thread-on Presta valve on the extending flexible hose - Fits easily in jersey pocket or next to your bottle cage - 120 PSI - Weight: 104 grams

• Switchable high-volume and high-pressure modes for faster inflation with less effort • TwistGripq III auto-adapts to Presta and Schrader valves • Rebuildable internals • Includes cage mount • 168 grams • 120psi max pressure

- Solution for mounting pumps and C02 inflators on frames or seatpost - Soft rubber block and Velcro loops hold pumps tightly

The world’s first CO2 inflator with tire gauge provides tire-inflation and tire-pressure measurement. The angled head fits Presta and Schrader valves and a special feature allows the user to adjust the flow while filling the tire. Dual-end design allows for one-cartridge storage. - CO2 inflator that features a gauge as well - Flow is adjustable using special feature - Compatible with both Presta and Schrader valves - Presta/Schrader with integrated dust cap, Push to inflate - Gauge: Reads 160 psi / 11 bar, 1-1/2” analog - Engineering-grade polymer - Weight: 45g /1.59 oz - Size: 6.5 x 5.2 x 3.3 cm / 2.5” x 2” x 1.3” - Accepts threaded cartridges - CO2 cartridges sold separately

Mounting Kit for Mountain Morph and Turbo Morph G.

Replacement parts for JoeBlow Pro and JoeBlow Booster.

The king has returned to rule! The new JoeBlow Ace DX features an innovative three-stage design that achieves both high pressures and high volume in record time. Stage one opens both barrels for big volume to reach 60 psi with 30% less effort than standard floor pumps. Stage two uses the main barrel only for pressures up to 120 psi while stage three engages the small barrel to achieve an amazing 260 psi. Two tone padded handles, wide stable base and new 4” base mounted analog gauge make inflation easy. The new SmartHead DX1 automatically adjusts to fit Presta and Schrader valves without swapping parts and the lower profile air release button makes getting the right pressure easy. Includes ball and air bladder type inflation needles. - SmartHead DX1 full metal pump head w/ air release button & x-long hose - Gauge: 260 psi / 18 bar; 4” base mount analog - Base: Aluminum/Rubber - Barrel: Anodized aluminum - Handle: Oversize dual tone - Weight: 2.45 kg / 5.4 lb - Size: 74 x 28 x 22 cm/29.1” x 11” x 8.7”