Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Car Racks

Yakima 15mm x 110 Fork Adapter
$59.00
This 15mm x 110 thru-axle adapter allows modern mountain bikers to quickly secure their bike on any 9mm fork-style bike mount. - 15mm x 110mm - Axle is not included. Works with your bike's thru-axle - Built in safety tabs - Durable black powder-coat finish - All Yakima thru-axle Fork Adapters are compatible with Yakima ForkLift, SprocketRocket, Viper, Boa, SteelHead, CopperHead, SideWinder, BikerBar, BedHead and many other 9mm fork mounts Product Specs: - Weight: 0.40 lbs. - Dimensions: L 4.50 in x W 1.25 in x H 4.00 in - Limited Lifetime Warranty
Yakima Fork Adapter
$59.00
This fork adapter allows you to put your thru-axle fork on any 9mm fork-mounted bike rack. - Axle not included. Works with your bike's thru-axle - Fits all fork bike mounts including, Yakima, Thule, Rocky Mounts, etc. - Built-in safety tabs - Durable black powder-coat finish Product Specs: - Weight: 0.32 – 0.38 lbs. - Minimum Crossbar Spread 16in - Maximum Crossbar Spread 42in - Limited Lifetime Warranty
Thule Spare Me
$299.95
Thule's Spare Me rack bolts onto the mount for your spare tire and securely carries two bicycles (total weight up to 75 pounds). It has Thule's Stay-Put cradles that protect your bikes and boasts an anti-sway design to keep your bikes from swinging together or hitting your vehicle. The arms fold down when not in use. An integrated locking cable and locking knob make it easy to secure bikes to the carrier and the carrier to the vehicle.
Sunlite Crossbar Adapter
$37.75
If you have a trunk or rear rack and a bike with an unconventional frame (such as a full-suspension or ladies bike), you probably need Sunlite's Crossbar Adapter. Vinyl-coated hooks on either end hold your bike and act as a "top tube" for easy transportation. In the middle, a quick-release telescoping adjustment ensures the Crossbar Adapter will fit almost any bike.
Saris Hatch Huggers
$24.99
Saris' Hatch Huggers fasten Saris racks (sold separately) to certain vehicles. They replace the regular straps for vehicles with glass hinge lines and vehicles with narrow gaps around the trunk.
Saris Protect-O-Pads
$15.99
Saris' Protect-O-Pads are foam blocks that separate and protect your bikes when multiple bikes are being transported. They come in packs of four.
Kuat Hi-Lo
$60.00
For those cases where fitment just isn't right. The Hi-Lo is a 2" hitch Extension & Rise/Drop built with Kuat style. It provides 7" or 10" of extension and 2.125" of rise/drop. The Hi-Lo comes with a threaded hitch pin to ensure a tight fit in your receiver. Approved for use with the Kuat NV 2.0, Base 2.0, Sherpa 2.0 and Transfer family.
Kuat Ubar
$35.00
So the international bike builder didn’t consider your bike rack design when creating his new full suspension frame? No worries. Kuat’s Ubar can adapt almost any frame to fit our Alpha or Beta rack. Features - Adapts oddly shaped frames for use with hanging style racks - Spring loaded for a solid fit - Coated hooks (prevent wear on your bike) - Installs in seconds - Fits most bikes
Delta Lockable Bike Hitch
$29.99
- Powdercoated steel body with 9mm skewer & hole in handle for padlock
Yakima 1A Raingutter Towers (4-pack)
$219.00
Yakima's 1A Raingutter Towers are the rock-solid foundation for your Yakima roof rack (for vehicles without factory roof racks). The 1A Raingutter Towers adjust to fit your vehicle's roof line and they have die-cast components that securely hold the crossbars (sold separately). Plus, they hold fast and safely to your roof with rubber pads that protect your vehicle's finish.
Yakima Accessory Lock Housing
$19.00
Make just about any accessory lockable with an SKS accessory housing. Use with bike, boat or BasketCase accessories that don't accept SKS lock cores. SKS lock cores sold separately. - Lock rack accessories to your vehicle's crossbar - Use with bike, boat, and BasketCase accessories - SKS Lock Cores sold separately Product Specs: - Weight: 0.20 lbs. - Dimensions: L 4.00 in x W 3.25 in x H 1.00 in - Limited Lifetime Warranty
Yakima BaseClip
$63.00
Tailor your towers—these super-strong clips come in a wide range of sizes and designs so you can precisely fit your BaseLine Towers to your car’s bare roof.
Yakima BlockHead
$39.00
Give your truck bed a permanent bike-mounting solution with this fork-style mount. In fact, this mount, with single-sided adjustment skewer for easy loading, can be installed anywhere you can put a couple bolts. Go ahead, get creative. - A "bolt anywhere" fork-style bike mount - Fits bikes with 9mm x 100mm front hubs - Corrosion-resistant anodized aluminum construction Product Specs: - Weight: 0.50 lbs. - Dimensions: L 4.00 in x W 1.50 in x H 1.87 in - Limited Lifetime Warranty
Yakima Control Key Single SKS
$4.50
The control key is "uncut" and is used only for the removal and installation of an unlocked SKS core. Product Specs: - Weight: 0.02 lbs. - Limited Lifetime Warranty
Yakima Corebar
$165.00
Combining modern aerodynamics with old-school muscle, the new CoreBar is the first aero bar built with roll-formed steel’s strength, utility and durability. The JetFlow design is wind-tunnel tested to reduce drag for less wind noise and better fuel economy, and the galvanized steel delivers proven load-bearing performance. - Wind tunnel tested JetFlow teardrop shape is strong, quiet and exceptionally aerodynamic - Roll-formed galvanized steel holds the load - Sleek aerodynamic design looks awesome on your car’s roof - Vinyl wrapped for durability and corrosion resistance - Includes CoreBar SL Adapter to integrate with all StreamLine System Towers - Available in 4 sizes: SM (50”),MD (60”), LG (70”) and XL (80”)
Yakima CrossBar Pads
$39.00 - $49.00
Our CrossBar pads combine security and protection with a soft foam core and an anti-slip surface that holds onto your gear. Sectioned hook-and-loop closures are designed to secure around roof rack attachment points and accessories to get a more customized fit for your vehicle. - Foam padding protects boards and boats from damage - Anti-slip material helps keep your gear in place - Sectioned hook-and-loop attachments fit easily around roof rack towers and accessories - Fits most SUPs and fishing kayaks - Fits our CoreBar and JetStream crossbars, factory crossbars, and most other aerodynamic crossbars
Yakima Fat Bike QR Locking Skewer
$39.00
A locking QR skewer for Fat Bikes with 9mm x 135mm axles. Includes a locking skewer with sleeve for use with HighSpeed and additional adapters for ForkChop. Product Details - Durable stainless steel axle and body - Easy to adjust end nut and cam lever - Lockable with a SKS lock, sold separately - Includes 9mm x 135mm threaded adapters for Yakima ForkChop - Includes 135mm sleeve for use on Yakima HighSpeed Product Specs - Weight: 1.15 lbs - Dimensions: L 9.50" x W 3.50" x H 1.25"
Yakima HD Bar
$249.00
Our burliest crossbar ever, the HD Bar is the one for heavy loads, rugged terrain and maximum utility. It delivers the muscle our new truck racks demand, and works with our StreamLine towers to get the heavy-duty job done right. The engineered aluminum construction provides superior support without weighing things down, integrated tie-down points to simplify load security, and T-slot attachment technology for adding gear mounts the fast, easy way. The Yakima Way. Product Details: - Strong, lightweight aluminum construction handles heavy loads great for rooftop tents - Integrated tie-down points on endcaps make it easy to secure gear - T-slots top and bottom to easily add Yakima and compatible gear mounts - Includes rubber infill for top T-slot for load protection and wind noise reduction - Built to last and look good doing it with a durable black powder-coat finish - Compatible with all StreamLine towers with our new HD Bar SL Adapter (sold separately #8003541) - Available in variety of lengths 55"/60"/68"/78" to create custom set-ups Dimensions: - Small = 9.61 lbs, L 55.00in x W 3.00in x H 1.50in - Medium = 10.68 lbs, Dimensions: L 60.00in x W 3.00in x H 1.50in - Large= 11.65 lbs, Dimensions: L 68.00in x W 3.00in x H 1.50in - X-Large= 12.00 lbs, Dimensions: L 78.00in x W 3.00in x H 1.50in
Yakima Holdup Wheelstrap
$3.30
Replacement Wheelstrap for Holdup. Adds 2.5" of Length to Forklift and Frontloader Rear wheel mounts.
Yakima Hood Anchor
$21.00
Yakima's Hood Anchor creates a secure attachment point at your hatch, trunk or hood for bow and stern tie downs. Sold in pairs, they’re highway-speed strong, coated to protect your vehicle’s paint job, and super easy to use - just drop them in place. Product Details - Creates a secure attachment point for bow and stern tie downs - Fits easily under a hood, hatch or trunk - Installation is simple - just drop them in place - Durable coated strap protects your vehicle's paint - Sold as a pair Technical Specs - Weight: 0.43 lbs - Dimensions: L 6.50in x W 2.00in x H 10.12in
Yakima Jetstream Bar
$219.00
Step up to the completely new Yakima bar. Thoroughly wind-tunnel tested, the black JetStream's JetFlow design is exceptionally aerodynamic, incredibly strong, lightweight, and really quiet on the move. The root of a modern rack system, it carries a lot and looks good doing it. Shopping for a full Yakima Roof Rack System? Use our Fit My Car tool to get outfitted with everything you need for a Base Rack System. - Comes with 2 Crossbars and 4 Endcaps - Wind-tunnel tested JetFlow teardrop shape is strong, quiet and exceptionally aerodynamic - Seamless extruded aluminum construction is light, strong and sleek - JetTruss internal support engineering adds serious strength for minimal weight - T-slot with SmartFill push-down infill for easy mount attachment and efficient airflow - Clear anodized alloy finish and high-gloss polymer end caps look awesome on your roof - Streamline crossbars are compatible with any StreamLine Tower - Need an adapter? Mighty Mount 39H will let you mount round and square bar accessories on your JetStreams - Find the right bar style and length to fit your needs - Compare four crossbar styles and features to learn more
Yakima Landing Pad
$63.00 - $126.00
Yakima's vehicle-specific Landing Pads are required to mount Yakima Control Towers to your car. One end of the Landing Pad attaches to the Tower and the other end attaches to your vehicle's factory track system. They also have rubber bottoms to protect your vehicle's finish. Select the right model Landing Pad for your vehicle using the Yakima fit configurator.
Yakima Landing Pad 27
$126.00
Custom Landing Pads to install directly to the factory mounting points on raised rails of the 2020+ Subaru Outback. Combine with SkyLine Towers and StreamLine crossbars for a full-featured Yakima base rack, significantly increasing cargo capacity over the factory crossbars. - Includes a snap-on cover when not in use - Each pad sold in a set of two - Includes 4 metal "C" anchor plates 1-3/16" x 13/16" (Contact Yakima Customer Service for additional size anchor plates) Product Specs: - Weight: 0.60 lbs. - Limited Lifetime Warranty
Yakima LoadWarrior Stretch Net
$49.00
Use Yakima's LoadWarrior Stretch Net to secure and control loads on the LoadWarrior rooftop cargo rack (sold separately). The multi-hook design is versatile and easy to use.
Yakima LockUp
$60.00
There's no need to worry when your bikes are unattended with Yakima's Lockup lock. The Lockup does double duty, locking your bike to the carrier and your hitch-mounted carrier to the car.
Yakima Locking Brackets
$69.00
Yakima's Locking Brackets replace two of the regular mounting brackets that come with your MegaWarrior and LoadWarrior luggage carriers so that you can safely secure these baskets to your crossbars. You get two Locking Brackets, Lock Cores and keys.
Yakima LongArm
$229.00
The LongArm truck bed extender easily extends the length of any truck bed up to 4 feet. Light and strong, the aluminum hitch-mounted rack is the ideal solution for hauling fishing kayaks, boards, lumber, ladders and more. Adjustable to three distinct load-carrying positions and rated to carry up to 300 pounds in lower positions, the LongArm takes your truck bed to the next level. - Provides 4 feet of additional truck bed length with a 60" wide crossbar - Adjustable to three load-carrying positions: - Bed height for use when your truck tailgate is open (300 lb carrying capacity) - Bed rail height for use with our BedRock rack system or a tonneau cover (300 lb carrying capacity) - Truck cab height by combining the LongArm Extension with a roof rack system (165 lb carrying capacity ) (sold separately) - Installs easily and securely to any 2" hitch receiver using the included 5/8" threaded hitch bolt - Aluminum construction engineered for strength – weighs only 12 lbs! - Integrated tie-down points ensure a secure ride for your fishing kayak, canoe, ladders, lumber and more - Add any Yakima boat mount to the crossbar for added boat protection. - Yakima signature bottle opener lets you enjoy a post-paddle cold one - Durable black powder-coat finish - Add the LongArm Pad for increased load protection (sold separately) - Add the LongArm Height Extension up to cab height (sold separately). - Heights from the top of the tongue to the top of the crossbar at the four angle positions (Vertical to Horizontal): - Low Bar Heights—40 in, 37 in, 27 1/2 in, 14 1/4 in - Mid Bar Heights- 41 3/8 in, 38 1/4 in, 28 in, 15 1/4 in - High Bar Heights- 42 3/4 in, 39 1/2 in, 29 in, 15 3/4 in Product Specs: - Weight: 13.00 lbs. - Dimensions: L 18.00 in x W 60.50 in x H 43.00 in - Limited Lifetime Warranty
Yakima LongArm Pad
$19.00
The LongArm Pad provides some extra protection when hauling gear on Yakima's LongArm truck bed extender. The pad combines durability and protection with a soft foam core and a ballistic nylon exterior that holds up over time. Hook and loop closures are designed to hug the LongArm’s crossbar tight and a center cutout allows side or centered placement. Sold as a single pad. PRODUCT DETAILS - Foam padding protects boats and other cargo from damage - Durable, ballistic nylon construction - Look and loop closures and 28” length perfectly fit around the LongArm crossbar - Center cutout allows side or centered placement on crossbar - Sold as a single pad TECHNICAL SPECS - Weight: 0.50 lbs - Dimensions: L 28.00in x W 3.00in x H 3.00in
Yakima Outdoorsman 300
$239.00
The versatile, no-drill Outdoorsman lets you create a top-of-vehicle truck rack system for your full-size pickup truck—without the need for a camper shell—while leaving you full access to the truck bed. - Clamps onto truck bed rails without any drilling - The perfect rack solution for everyday hauling of ladders and lumber - Heavy-duty construction handles up to 300 lbs - Sold in pairs; combine single pair with racks on truck roof or combine two pairs for complete system Product Specs: - Weight: 25.00 lbs. - Dimensions: L 16.00 in x W 2.00 in x H 29.00 in - Limited Lifetime Warranty
Yakima Q Clip
$50.00
Yakima's vehicle-specific Q Clips are required to mount Yakima Q-Towers to your car. One end of the Q Clip attaches to the Tower and the other end attaches to your vehicle's door frame when you fasten your roof rack. Plus, they're coated to protect your vehicle's finish. Select the right model Q Clip for your vehicle using Yakima's rack configurator.
Page 1 of 8 Next page